Automatic water softening device. Runxin F69P3-F70BL valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket. Output hardness adjustment via by-pass, by rotating the two levers on the by-pass, you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn

Evolio has been developed as an easy-to-use complete softener with a modern and attractive design. Each version is available in 4 different sizes. The timer is mounted on the top cover, facilitating the access to the softener data, easily readable thanks t

This is a water softener elegant design that gives you the feeling of luxury water. Reduces the unpleasant limestone around the tub and the sink. It will save you money on your heating bill and reduce the consumption of all detergents and cleaning products. The water pipes will always be clean and free from fouling, clogging and damage. In all the water circuit there will be more pressure losses or water flows minors. Efficient and carbon neutral The Peanut 368 water softener has been shown to save up

BNT650T valve 1" with mechanic regulation, regeneration time. Low consumption of water and salt per regeneration. Extremely easy programming thanks to its fixed-clicks timer on which you can set regeneration intervals based on the desired time. Hardness regulator output Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water output. To mix a specific output hardness value, adjust screw and test

Automatic water softener electronic BNT1650F valve 1", regeneration metered-time. Low consumption of water and salt per regeneration. Programming is simple and fast - Insertion the time. - Insertion day of week. - Time of regeneration. - Number of days between regenerations. - Hardness input. Hardness regulator output Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water outp