Hydrocyclonic Centrifugal filters are an ideal solution for removing sand, gravel, and heavier suspended particles from water, especially in systems fed by wells, rivers, lakes, or recycled water. Using the principle of centrifugal separation, water enters the filter and creates an internal vortex that drives heavier particles downward into the bottom collector, while cleaner water flows out through the outlet. This makes hydrocyclonic filters an excellent first-stage filtration option for irrigation systems, industrial water treatment, and general water filtration, especially when combined with disc or screen filters. The PA body offers strong resistance against chemicals and sand abrasion; in addition, the filter is UV stabilized, with high resistance to heat and sunlight UV exposure, making it reliable for outdoor installations. The bottom collector is easy to disassemble for quick maintenance and cleaning.

Mod. 28001001-02 Hydrocyclone sand filters
The 2" hydrocyclonic filter designed for efficient removal of sand and heavy sediment from water. It is especially suitable as a first-stage filtration unit for irrigation systems, well water, and industrial applications where downstream equipment must be protected from abrasive particles. Thanks to centrifugal separation, the cod. 28001001-01 helps reduce the load on secondary filters and improves overall system efficiency. Its PA body, resistant to chemicals and sand impact, combined with a UV-stabilized construction with high resistance to heat and sunlight UV rays, makes it suitable for demanding outdoor installations. The bottom collector is easy to remove, allowing fast and simple maintenance.

Mod. 28001001-02 Technical Data
Connections: 2" flange
Tank capacity: 16ltr.
Maximum flow rate: 30m3/h
Maximum pressure: 8bar
Dimensions (HxWxD): 1100x490430 mm.
Additional measurements: X 180mm. / Y 963mm.

Recommended Applications:
- Well water pre-filtration
- Irrigation systems with sand or gravel in the water source
- Primary filtration for industrial systems
- Protection for downstream disc filters, screen filters, and equipment

Mod. 28001001-03 Hydrocyclone sand filters
The 3" hydrocyclonic filter designed for systems with higher flow requirements and reliable removal of sand, gravel, and heavy particles. It is an excellent choice for medium to large irrigation systems, natural water sources, and industrial applications where efficient pre-filtration is needed before finer filtration stages. Its centrifugal action uses gravity and an internal vortex to direct sediment downward into the collection chamber. Built in PA for resistance to chemicals and sand abrasion, the filter is also UV stabilized, offering high resistance to heat and sunlight UV exposure, which is especially important for outdoor installation. The removable bottom collector makes cleaning and maintenance easier.

Mod. 28001001-03 Technical Data
Connections: 3" flange
Tank capacity: 16ltr.
Maximum flow rate: 50m3/h
Maximum pressure: 8bar
Dimensions (HxWxD): 1220x490x430 mm.
Additional measurements: X 205mm. / Y 1070mm.

Recommended Applications:
- Professional irrigation systems
- Well water with sand content
- Lake or river water as a first filtration stage
- Industrial systems using process or recycled water

Mod. 28001001-04 Hydrocyclone sand filters
The highest-capacity model in the range, featuring a 4" connection and a maximum flow rate of up to 100 m3/h, making it ideal for applications with high water volumes and significant sediment load. It is suitable for large irrigation systems, industrial primary filtration, and protection of downstream equipment in water containing sand and other heavy particles. Its centrifugal separation technology removes denser impurities without requiring electrical power, delivering simple, rugged, and efficient filtration. The PA body provides strong resistance to chemicals and sand impact, while the UV-stabilized construction with high resistance to heat and sunlight UV rays ensures reliable outdoor performance even in demanding environments. The detachable bottom collector allows quick sediment chamber maintenance.

Mod. 28001001-04 Technical Data
Connections: 4" flange
Tank capacity: 27ltr.
Maximum flow rate: 100m3/h
Maximum pressure: 8bar
Dimensions: 1440x520x524 mm.
Additional measurements: X 250mm. / Y 1260mm.

Recommended Applications:
- Large irrigation systems
- Well water or surface water pre-filtration
- Industrial systems with high flow rates
- Installations requiring effective removal of heavy particles before fine filtration.

Mod. 28001001-02 Hydrocyclone sand filters
2" hydrocyclonic Centrifugal filter for sand and heavy sediment separation. Max flow 30m3/h, max pressure 8 bar, 16ltr. tank. PA body resistant to chemicals and abrasion, UV stabilized with high resistance to heat and sunlight UV rays.

Mod. 28001001-03 Hydrocyclone sand filters
3" hydrocyclonic Centrifugal filter for irrigation pre-filtration and industrial applications. Max flow 50m3/h, max pressure 8 bar, 16ltr. tank. PA construction, removable bottom collector, UV stabilized.

Mod. 28001001-04 Hydrocyclone sand filters
4" high-flow hydrocyclonic Centrifugal filter ideal for large systems and primary filtration. Max flow 100m3/h, max pressure 8 bar, 27ltr. tank. Durable PA material, UV-stabilized construction, easy maintenance.

Customers Login