Shower water softener (Reg. Manual) 4,5 lt. resin

Shower water softener (Reg. Manual) 4,5 lt. resin

The shower water softener is a compact and reliable solution designed exclusively for shower water treatment. It effectively reduces water hardness and heavy metal ions, significantly improving user comfort while helping protect skin, hair, and plumbing components from scale buildup.
Thanks to its electricity-free operation, the absence of a predefined drain line, and simple manual regeneration, the unit is ideal for residential applications as well as hotels, gyms, spas, wellness centers, mobile homes, boats, and any installation requiring fast, flexible setup.

Key Features
Water softening through ion-exchange resin technology
Reduces limescale and heavy metal ions, improves skin comfort and hair softness
No power supply required
No permanent drain connection needed
Compact, space-saving floor-standing design
Quick-connect 1/2" BSP fittings
Long service life with low operating pressure

Operating Principle
The unit operates in Service mode (Ser.), supplying softened water directly to the shower. The brine level is automatically maintained.
When resin capacity is exhausted (indicated by increased outlet water hardness), manual regeneration is required turning the proper knob to the Regen. position
Discharge brine will pass directly through the shower floordrain for approximately 30 minutes
Return the knob to Service mode
Rinse for 1-2 minutes to flush residual brine
Regeneration is performed using food-grade salt tablets, safe for domestic use.

Salt Management
Maximum salt storage capacity: 8kg
Recommended salt dosage: 3-4 kg per regeneration cycle
Always maintain undissolved salt in the brine tank
Use salt tablets specifically designed for water softeners

Installation
Installed directly between the faucet and shower hose
Floor-standing installation, preferably near a floor drain
Suitable for both shower stalls and bathtub showers
No electrical wiring or plumbing modifications required

Maintenance
No routine maintenance required
If unused for more than 7 days, flush the system for 1-2 minutes before use
Keep the sliding cover closed during operation to prevent contamination of the brine tank

Operating Precautions
Designed exclusively for shower applications
Maximum inlet water temperature 60°C
Ambient operating temperature: 1-49°C
Avoid exposure to UV radiation or heat sources
Use only approved salt tablets
Do not strike or drag the unit on the floor
Always check for leaks after installation

Technical Specifications
Maximum flow rate: 1,0 m3/h
Recommended service flow rate: <0,5 m3/h
Operating pressure: 0,15-0,3 MPa
Inlet / outlet connections: 1/2"
Dimensions: 360x200x440 mm