Profine PLATINUM carbon block 0,2 micron water filters

Profine PLATINUM carbon block 0,2 micron water filters

Profine® Platinum is a one-of-a-kind filter designed to effectively remove a wide range of contaminants from tap water, making it safer to drink. Thanks to its innovative filtration technology, which includes a first stage with a 10 micron pre-filter and a second stage with a 0,2 micron carbon block, this filter acts as a barrier against chlorine (which often alters the water’s taste and smell), invisible but potentially harmful microplastics, heavy metals (such as lead and copper), and PFAS (chemical compounds harmful to both the environment and human health).
If the cartridge is used in food processing equipment, the whole system must comply with the EU regulation 178/2002.

* Ideal for drinking and cooking in maximum safety
* Improves taste of beverages, sparkling water and post-mix systems.
* No electrical connection required.
* Vertical and horizontal installation.
* The filter is easy to install and to replace without using any special tool.

Features:
* It effectively removes heavy metals, PFAS, chlorine, and unpleasant tastes and odors.

For use with:
04400201-01: Profine S replacement single filter head 8mm. quick fit. (6)
04400201-02: Profine S replacement single filter head 10mm. quick fit. (6)
04400201-03: Profine S replacement single filter head 1/4" quick fit. (6)
04400201-04: Profine S replacement single filter head 3/8" quick fit. (6)

• Technology: Co-sintered Carbon Block with chelating media
• Micron rating: 0,2 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) MINI 215x87,4(mm.) - 8,46”x3,44"(In.)
• Filter dimensions: HxD (mm.) SMALL 270x87,4(mm.) - 10,63”x3,44"(In.)
• Filter dimensions: HxD (mm.) MEDIUM 385x87,4(mm.) - 15,16”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.