This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

BLUE FILTRATION KIT housing Ionicore blue Cartridges Melt Blown Polypropylene Silver Ion

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Profine Pfas Medium KIT system 0,5 micron water filters, head, faucet

Profine Pfas Medium KIT system 0,5 micron water filters, head, faucet
printcompareask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
04400114-02
Profine Pfas Medium KIT system 0,5 micron water filters, head, faucet
 
Informations

Code:
04400114

Weight:
4.5 Kg

Brand:
Profine Water Filters
Mfr. Code:

Description
Profine Pfas Medium KIT system 0,5 micron water filters, head, faucet
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Profine® Pfas designed to removes unwanted odors, flavors and Perfluoroalkyls (PFAS). Pfas selective resin, final filtration stage at 0.5 µm with Carbon Block technology added with silver ions for bacteriostatic action. To be used with Pfas concentrations up to 500 ng/l. If the cartridge is used in food processing equipment, the whole system must comply with the EU regulation 178/2002.

* Ideal for hotels, restaurants facilities, Ho.Re.Ca., Coffee Machines and multiple applications of Profine filters.
* Improves taste of beverages, sparkling water and post-mix systems.
* Protects your implants and removes completely scales due to limestone deposits.
* No electrical connection required.
* Vertical installation.
* The filter is easy to install and to replaces without using any special tool.

Features:
* Removes unwanted odors, flavors and Perfluoroalkyls (PFAS)

• Technology: Pfas selective resin, final filtration stage at 0.5 µm with Profine® Carbon Block technology added with silver ions for bacteriostatic action
• Micron rating: 0,5 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Parts Included in the system:
• 2x Filter head • 2x Pfas Medium filter • Faucet with bright LED • Duplex mounting bracket

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for the contaminants reduction may be used with disinfected water that may contain filterable pollutants. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Features
Features
Customers Login
e-mail
password

3 ways taps Everpure Filters Microfiltration Reverse Osmosis RO

www.sinergroup.it Everpure Filters