This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

RO50 RO75 reverse osmosis with tank TDS regulator Membrane 50gpd Membrane 75gpd Pump System UV water purifier

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Everpure Insurice 4000(2) antimicrobial antiscale replacement filter 45.360lt. - 6,3lt./min. 0,5 micron (6)

Everpure Insurice 4000(2) antimicrobial antiscale replacement filter 45.360lt. - 6,3lt./min. 0,5 micron (6)
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
EV961237

Weight:
1.035 Kg

Brand:
Everpure
Mfr. Code:
EV9612-37

Description
Everpure Insurice 4000(2) antimicrobial antiscale replacement filter 45.360lt. - 6,3lt./min. 0,5 micron (6)
click to enlarge
click on images to enlarge
Full description
Everpure Insurice 4000(2)
Micro-Pure II filtering media 0,5 micron rating density. It removes giardia cysts and cryptosporidium, asbestos fibers, bad taste and odor, chlorine, dirt, rust, invisible particles, mold and algae. It also reduces oxidized iron, manganese and sulphate.

* Ideal for ice makers.
* Improve taste of beverages and ice.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical installation.
* The rapid filter is easy to install and replace without use of special tools.

The I4000(2) filter with AgION™ antimicrobial protection inhibits any potential bacterial growth.
The Hydroblend anti-limescale inhibitor based on polyphosphate does not allow limescale to settle inside the water circuit and the pumps. It reduces maintenance costs and downtime by keeping them running at full capacity.

Features:
* Chlorine reduction
* Limescale reduction
* Bacteriostatic
* Reduction of cysts
* Reduction of particulate in suspension

• Technology: Precoat, activated carbon (PAC), Micro-Pure II
• Micron rating: 0,5 micron
• Service life: 12.000 gallons (45.360 Liters)
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)
• Service flow rate: 6,3 l./min. (1,67 gpm)
• Temperature: 35 - 100°F (2-38°C)
• Pressure: 10 - 125 psi (0,7 - 8,6 bar), non-shock.
• Size: x
• Filter dimensions HxD (mm.): I4000(2) 635x82,5(mm.) - 25”x3,25"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
• Cartridges Change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi), every 6 months but at least annually.

Do not use with microbiologically unsafe or unknown quality water without disinfecting first. Cysts reduction certified systems can be used with disinfected water that may contain filterable cysts. All systems must be mantained according to the producer instructions.
Nota bene: The removed or reduced contaminant agent may not necessarily be in your water.
Related products

www.sinergroup.it Everpure Filters