This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

DMfit quick fit fittings black series acetal resin metric size food&drink beverage compressed air flow systems

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Everpure IN-10 antiscale GAC in line filter 1/4" FPT 2"x10,5" (6)

Everpure IN-10 antiscale GAC in line filter 1/4" FPT 2"x10,5" (6)
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
EV910008

Weight:
0.425 Kg

Brand:
Everpure
Mfr. Code:
EV910008

Description
Everpure IN-10 antiscale GAC in line filter 1/4" FPT 2"x10,5" (6)
click to enlargeclick to enlarge
click on images to enlarge
Full description
Everpure IN LINE filters IN-10
Drastic reduction of odor, color, taste, ideal for vending machines and ice makers.
Designed to be also located inside of the machinery for applications in catering, post mix system, coffee machines, vending machines and water coolers. It removes chlorine
and chloramines which can cause coffee and water to taste bitter.

* Improves the taste of beverages.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Installation: horizontal or vertical
* The filter is easy to install and replace without use of special tools.

The Hydroblend antiscale inhibitor to base of polyphosphate, does not allow at the limescale to deposit inside water and pumps circuit. Reduces maintenance costs and machine
downtime maintaining them functioning at full capacity.

The IN LINE filters does not require filter heads or bayonet joints for their installation and can be placed in any position (horizontal or vertical).
The filter, it is easy to install and replace without use of special tools.

Features:
* Chlorine reduction
* Limescale reduction

Technology: Granular activated carbon (GAC)
Micron rating: none
Service life: 9,085 liters (2,400 gallons)
**Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)
Service flow rate: 2,8 l./min. (0.75 gpm)
Temperature: 35 - 100°F (2 - 38°C)
Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock.
Size: 2"x10,5"
Connections: 1/4" Female
Filter dimensions: HxD (mm.): IN-10 50,8x266(mm.) - 2”x10,5"(In.)
Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging in the filter.
Filter change: When capacity is reached, or when flow comes too slow (precipitates under 0,7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be
used with disinfected water that may contain filterable cysts. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.

www.sinergroup.it Everpure Filters