Languages
Products
telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it
RO800 PLUS direct flow reverse osmosis 120lt./h. with electronic faucet, without TDS regulator
Variants
Code
Description
050040-001
RO800 PLUS direct flow reverse osmosis 120lt./h. with electronic faucet, without TDS regulator
050040-010
RO800 PLUS replacement polypropylene + CTO carbon block filter (18)
050040-011
RO800 PLUS replacement 800GPD membrane element + GAC filter (9)
050040-012
RO800 PLUS replacement 1-way electronic faucet
050040-013
RO800 PLUS replacement inlet solenoid valve
050040-014
RO800 PLUS replacement flushing solenoid valve
050040-015
RO800 PLUS replacement high pressure switch
050040-016
RO800 PLUS replacement ballast
050040-017
RO800 PLUS replacement inside electronic board
050040-018
RO800 PLUS extension cable connection for electronic faucet 1,40m.
Informations
Code:
050040
Weight:
0 Kg
Description
RO800 PLUS direct flow reverse osmosis 120lt./h. with electronic faucet, without TDS regulator
click on images to enlarge
Full description
RO800 PLUS is a RO system of the latest generation, designed to offer the highest performances and adapting to the features and the spaces of every kitchen. This device is able to provide up to 2 liters per minutes of osmotic water thanks to the 800GPD membrane equipped.
Filtration
Filter 1: Sediment + Carbon Block
Filter 2: RO Membrane 800 GPD + Carbon Gac
Filters replacement
Once you have closed the inlet water and switched off the device, you just have to extract the filter cover, push these placement button and the filter will be released to be removed. Now you can insert the new filter in its seat until you'll hear a "click" and keep pressed for 3 seconds the reset button in order to restore the filter length.
Smart faucet
The led placed on the faucet's body shows the water quality and provide a memo for the filter replacement.
Features:
- Voltage/rated frequency: 100-240V. - 50/60 Hz
- Rated power: 75W.
- Inlet pressure: 0,1-0,4 MPa (1-4 bar)
- Flow rate: 2 l./min.
- Working temperature: 4-40 °C
- Dimensions (mm.): 425x130x252
Accessories included in the packaging:
1x 1/4" PE red tube (2mt.);
1x 1/4" blu tube (2mt.);
1x 3/8" tube (2mt.);
5x Cable ties;
1x Instruction manual;
1x Smart faucet;
1x Drain clip;
10x 1/4" clip;
5x 3/8" clip;
1x Transformer;
1x 3 ways ball valve;
1x 3/8" L quick connector;
1x 1/4" L quick connector;
1x 1/4" I quick connector.
After the reverse osmosis process, it is recommended to install the Ionicore inline filter as final stage. This filter naturally reintroduces calcium and magnesium and, thanks to the coconut-based granular activated carbon (GAC) and its pH regulation function, it stabilizes the water, making it more balanced and pleasant to drink.
1x 07004004 Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10"
The reverse osmosis is not a device that makes water drinkable(non-drinkable water into drinkable water) and it work only if it's installed on water compliant with the law, municipal potable water or well water if previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water.
Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be preserved according to the producer instructions.
The pollutant parts removed or reduced by this system are not necessarily in your water.
Filtration
Filter 1: Sediment + Carbon Block
Filter 2: RO Membrane 800 GPD + Carbon Gac
Filters replacement
Once you have closed the inlet water and switched off the device, you just have to extract the filter cover, push these placement button and the filter will be released to be removed. Now you can insert the new filter in its seat until you'll hear a "click" and keep pressed for 3 seconds the reset button in order to restore the filter length.
Smart faucet
The led placed on the faucet's body shows the water quality and provide a memo for the filter replacement.
Features:
- Voltage/rated frequency: 100-240V. - 50/60 Hz
- Rated power: 75W.
- Inlet pressure: 0,1-0,4 MPa (1-4 bar)
- Flow rate: 2 l./min.
- Working temperature: 4-40 °C
- Dimensions (mm.): 425x130x252
Accessories included in the packaging:
1x 1/4" PE red tube (2mt.);
1x 1/4" blu tube (2mt.);
1x 3/8" tube (2mt.);
5x Cable ties;
1x Instruction manual;
1x Smart faucet;
1x Drain clip;
10x 1/4" clip;
5x 3/8" clip;
1x Transformer;
1x 3 ways ball valve;
1x 3/8" L quick connector;
1x 1/4" L quick connector;
1x 1/4" I quick connector.
After the reverse osmosis process, it is recommended to install the Ionicore inline filter as final stage. This filter naturally reintroduces calcium and magnesium and, thanks to the coconut-based granular activated carbon (GAC) and its pH regulation function, it stabilizes the water, making it more balanced and pleasant to drink.
1x 07004004 Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10"
The reverse osmosis is not a device that makes water drinkable(non-drinkable water into drinkable water) and it work only if it's installed on water compliant with the law, municipal potable water or well water if previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water.
Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be preserved according to the producer instructions.
The pollutant parts removed or reduced by this system are not necessarily in your water.
Related products
Bestsellers
Reverse osmosis - Household
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Most viewed
Reverse osmosis - Household
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
