This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

UV System Complete Set Ultrarays Purifier Germicidal Lamp Philips

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

TURBIDEX filtering media (28)

TURBIDEX filtering media (28)
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Informations

Code:
15515604

Weight:
0.79 Kg

Description
TURBIDEX filtering media (28)
click to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Tariff per liter.

Hyper-Filtration Media for Industrial & Potable Water Treatment Systems.
The Turbidex is a technological material, advanced, nothing to do with the sand which is a poor material and works mechanically. Turbidex™ is more than our name it's the product as well. Turbidex™ granules consist of a high surface area alumino-silicate mineral that provides exceptional suspended solids filtration. The macro porous nature of Turbidex™ allows for filtration at levels below 5 Microns in particle size.
The irregular surface area and extensive porosity of Turbidex™ makes it the perfect filtration media for any application where solids removal is essential to the process. The Turbidex is a filtering media that very effectively replaces sand in the clarifier filters.

The Science of Turbidex™
Turbidex™ is the latest generation in filtration media. Traditional sand and multimedia were satisfactory for some water treatment but industries that require almost pure water demanded a media that not only filters down to 5micron but saves time and money in application and usability.

THE BENEFITS OF TURBIDEX™:
Hyper Filtration Efficiency
The filtration increase grade is of 7 - 10 times; with the turbidex We arrive to filter until 5 microns, with the sand is hard to filter below 40 (longer life of the systems with turbidex).
Higher Flow Rates
With nominal service flow rates up to 15 gpm/ft2 in pressure filters, Turbidex™ allows significant savings in initial equipment costs when compared to traditional medias. Turbidex™ allows for peak flow rates up to 20 gpm/ft2 Turbidex.
Superior Water Clarity
Traditional sediment filtration media rely on mechanical straining to remove suspended solids for turbidity reduction. Turbidex™ filtration media incorporates straining as well as ion exchange, sedimentation and flocculation to produce crystal clear water down to <0.1 NTU of turbidity.
Water Savings
The load capacity of Turbidex ™ is up to 1.5 times higher compared to various filtering medias and up to 2.8 times higher compared to sand filters (less operating costs).
Systems reduced
At the same flow rate with Turbidex™ You can use very often less volume of filter bed and then smaller vessels (less system costs).
Reduce pressure drop
At the same flow, you can use very often smaller pumps, the Turbidex ™ has less pressure drop (less system costs).
Lightweight Media
Weighing 50-70% less than traditional medias, using Turbidex™ will result in substantial freight savings.
Resistant
High resistance to acids, chlorine and chemicals in general. In the pools also retains the ammonia.

INDUSTRIES BENEFITING FROM TURBIDEX™:
Industrial - Aquaculture - Municipal - Commercial - Food & Beverage - Water Recycle - Car wash - Agriculture - Manufacturing - Pharmaceutical.
All these industries and more have realized the superior qualities of filtering water with Turbidex™. If your industry is not listed, its likely that your water quality can be greatly enhanced by switching to Turbidex™.

Turbidex™ Operating Parameters and Physical Characteristics
Turbidex™ is the latest generation in filtration media. The reason is Turbidex's ability to filter water beyond the competition with Physical Absorption, Electrostatic Absorption and Ion-Exchange. These additional filtration qualities allows Turbidex™ to filter water down to as low as 3 microns.

Operating Parameters
* Bed depth: 30 - 48 inches
* Freeboard: 50% of bed depth
* Flow rate: 12 - 20 gpm/ ft2
* Backwash rate: 14 - 18 gpm/ ft2
* Replacement media ratio : 1:1

Physical Characteristics
* Color: off-White
* Bulk Density: 50 lbs./ft3
* Surface area: 14 to 25 m2/g
* Mesh Size: 14 x 30
* Uniformity Coefficient: 1.64

Examples of system sizing, with water speed of 20 m/h:
* To get 5 mc/h of flow you need a vessel 24x69 (diameter 610 x high 1890 mm) with 262 – 300 litres of Turbidex (nominal flow = 5,84 mc/h)
* To get 10 mc/h of flow you need a vessel 30x72 (diameter 770 x high 2050 mm) with 427 – 450 litres of Turbidex (nominal flow = 9,31 mc/h)
* To get 13,5 mc/h of flow you need a vessel 36x72 (diameter 927 x high 2120 mm) with 623 – 700 litres of Turbidex (nominal flow = 13,49 mc/h)

Turbidex™ is certified with NSF.
Related products

www.sinergroup.it Everpure Filters