Only for technologic use.
Tariff per liter.

Crystal-Right™ remove from the water unoxidized iron, manganese and hardness in one step.
Crystal-Right™ Silica crystals are a natural choice for water treatment systems. No other product has comparable efficacy in treatment water in one step.

These zeolite crystals come from a sodium aluminosilicate carefully produced and processed by Mineral-Right using an exclusive technology. Through its unique crystalline structure, Crystal-Right™ provides superior removal of hardness, unoxidized iron and manganese while raising pH levels of acidic water.

Unlike spherical granules of resin, the Crystal-Right™ crystals provide a better filtration and are completely cleaned during backwashing faster than common resins, without loss of the product.

Consider the many benefits of a monosystem product single pass that day after day sets new industry standards. Your resellers and customers will be amazed.

Crystal-Right™ Silica crystals can be of help in achieving a better water treatment system:

• Removal the unoxidized iron, manganese and hardness in one step;
• The version of CR 100 removes or reduces the ammonium in the water (max speed 10m/h);
• Raising pH levels of acidic water;
• The regeneretion is obtained using the 30% salt (NaCl) in less than the use of softening resins standard;
• Contrary to standard resins, chlorine has no negative effects on the functioning of CR and it is recommended that a chlorination of the brine during regeneration to stop the proliferation of bacteria;
• Provide a superior filtration of sediments and other impurities that turbidity water;
• Chlorination of Crystal-Right™ crystals sanitize the bed and keeps a residual of chlorine, eliminating the microbial load;
• If used correctly the Crystal-Right has a lifespan of about 10 years;
• Can be chlorinated without causing neither damage nor crushing of the product;
• Packed in convenient bags of 28 lit.

Regeneration program suggested
28 LITERS of Crystal-Right
• PH range: 6+ (CR100); 7+ (CR200);
• Total unoxidized Iron and Manganese: 8 mg/l
• Range of Hardness: 5-68 °F (CR100); 5-137 °F (CR200);
• Upflow washing: 14 min.
• Brine and Rinse: 72 min.
• Aspiration Brine: 1,5 lit.
• Upflow washing: 15 min.
• Pressure vessel dimensions: 25x112 cm - 10x44"

42 LITERS of Crystal-Right
• PH range: 5+ (CR100); 7+ (CR200);
• Total unoxidized Iron and Manganese: 10 mg/l
• Range of Hardness: 5-68 °F (CR100); 5-137 °F (CR200);
• Upflow washing: 14 min.
• Brine and Rinse: 90 min.
• Aspiration Brine: 1,5 lit.
• Upflow washing: 15 min.
• Pressure vessel dimensions: 25x137 cm - 10x54"

71 LITERS of Crystal-Right
• PH range: 5+ (CR100); 7+ (CR200);
• Total unoxidized Iron and Manganese: 15 mg/l
• Range of Hardness: 5-68 °F (CR100); 5-137 °F (CR200);
• Upflow washing: 14 min.
• Brine and Rinse: 90 min.
• Aspiration Brine: 3,0 lit.
• Upflow washing: 15 min.
• Tank dimensions: 33x137 cm - 13x54"

To use the crystals require this features:
• Hardness min 5 °F
• TDS (Total Dissolved Solids) min 80 mg/l
• Flow backwash between 17 and 24 m/h

Crystal-Right™ Silica crystals 100 (Cod. 15515602-CR 100)
Removal of hardness, unoxidized iron and manganese and raising pH levels

Crystal-Right™ Silica crystals 200 (Cod. 15515602-CR 200)
Maximum capacity of removal of hardness, unoxidized iron and manganese