This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

CS series Water Softener Electronic Valve Regeneration Metered Time saving cleaning protection health pureness beauty  liters resin

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin

BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
15000126-08
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 8 lt. Europe I
 
15000126-10
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 10 lt. Europe I
 
15000126-12
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 12 lt. Luxury I
 
15000126-15
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 15 lt. Europe II
 
15000126-20
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 20 lt. Europe II
 
15000126-25
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 25 lt. Europe II
 
15000126-30
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 30 lt. Luxury II
 
Informations

Code:
15000126

Weight:
10 Kg

Description
BNT1650F Valve automatic water softener 1" electronic (Reg. Metered-Time) 8-10-12-15-20-25-30 lt. resin
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Automatic water softening device. BNT1650F valve with Volume/time regeneration. The valve is fully programmable and its programming is quick and easy. Complete with 230V - 50Hz power supply socket.
Output hardness regulator integrated into the valve body, by turning the adjustment knob you will mix the raw water with the appliance softened water. An outlet hardness of about 15°F is recommended, however, the most frequently used setting is not less than 5°F. To mix a specific output hardness value, turn the regulator a little at a time (1/4" of a turn) and test the water. Repeat the procedure until the desired hardness value is reached. To check the inlet/outlet device water hardness, we recommend to purchase code 13000001 Titrant total hardness (1°F) 15cc. single reagent.

TO BUY WITH EVERY SOFTENER
1x 02001014 3-pieces standard housing 10" clear IN-OUT 1" with wrench & wall mounting bracket
2x 04001006-05 Ionicore wound polypropylene cartridge 9-3/4" - 50 micron
1x 13000001 Titrant total hardness (1°F) 15cc. single reagent

- Water softeners are supplied without salt, we recommend to use pads salt.
- The BNT1650F valve softeners are supplied already complete with by-pass.

The softener is programmed with an inlet hardness of 40°F, an outlet hardness of 0°F and a safety regeneration every 7 days.

Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softner.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on the concentration of sodium and water hardness, it is possible that the water presents a sodium concentration of higher than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a reverse osmosis home for water to drink.

Valve features:
- Connections: IN-OUT 1"M.
- Drain line: 1/2" hose connection with from 2mt. to 4mt. hose supplied
- Brine line: quick fitting 3/8".
- Regeneration: Down flow.
- Adjustable regeneration cycles in the range 0 - 99 minutes.
- Pressure vessel connection thread: 2,5"NPSM.
- Bottom distributor pipe connection diameter: 1,05"(27mm.).
- Working pressure (min-max): 1,4 - 8,4bar (20,3 - 121,8psi).
- Working water temperature range (°C): 1 - 42.
- Overflow: 3/8" hose connector.

Model Specifications 15000126-08 8lt. resin (suitable for 1/2 people)
* Exchange capacity: 44ºHFxm3.
* Salt consumption for regeneration: 1,24 Kg./salt.
* Water consumption for regeneration: 53,6lt.
* Quantity of treated water for regeneration, 30°F-0,68m3, 35°F-1,26m3, 40°F-1,1m3, 45°F-0,98m3, 50°F-0,88m3, 60°F-0,73m3.
* Max. flow 0,32 m3/h.
* Dimensions Europe I - Base (mm.): 480x320 * Height (mm.): 655

Model Specifications 15000126-10 10lt. resin (suitable for 2/3 people)
* Exchange capacity: 55ºHFxm3.
* Salt consumption for regeneration: 1,8 Kg./salt.
* Water consumption for regeneration: 67lt.
* Quantity of treated water for regeneration, 30°F-1,83m3, 35°F-1,57m3, 40°F-1,37m3, 45°F-1,22m3, 50°F-1,1m3, 60°F-0,916m3.
* Max. flow 0,54m3/h.
* Dimensions Europe I - Base (mm.): 480x320 * Height (mm.): 655

Model Specifications 15000126-12 12lt. resin (suitable for 2/3 people)
* Exchange capacity: 66ºHFxm3.
* Salt consumption for regeneration: 1,8 Kg./salt.
* Water consumption for regeneration: 80,4lt.
* Quantity of treated water for regeneration, 30°F-2,2m3, 35°F-1,88m3, 40°F-1,65m3, 45°F-1,46m3, 50°F-1,32m3, 60°F-1,1m3.
* Max. flow 0,54m3/h.
* Dimensions Luxury I - Base (mm.): 605x350 * Height (mm.): 670

Model Specifications 15000126-15 15lt. resin (suitable for 3/4 people)
* Exchange capacity: 90ºHFxm3.
* Salt consumption for regeneration: 2,5 Kg./salt.
* Water consumption for regeneration: 100,5lt.
* Quantity of treated water for regeneration, 30°F-3,00m3, 35°F-2,57m3, 40°F-2,25m3, 45°F-2,00m3, 50°F-1,8m3, 60°F-1,5m3.
* Max. flow 0,68m3/h.
* Dimensions Europe II - Base (mm.): 480x320 * Height (mm.): 1.120

Model Specifications 15000126-20 20lt. resin (suitable for 4/6 People)
* Exchange capacity: 110ºHFxm3.
* Salt consumption for regeneration: 3,2 Kg./salt.
* Water consumption for regeneration: 134lt.
* Quantity of treated water for regeneration, 30°F-3,66m3, 35°F-3,14m3, 40°F-2,75m3, 45°F-2,44m3, 50°F-2,2m3, 60°F-1,83m3.
* Max. flow 0,942m3/h.
* Dimensions Europe II - Base (mm.): 480x320 * Height (mm.): 1.120

Model Specifications 15000126-25 25lt. resin (suitable for 6/8 People)
* Exchange capacity: 137ºHFxm3.
* Salt consumption for regeneration: 3,9 Kg./salt.
* Water consumption for regeneration: 167,5lt.
* Quantity of treated water for regeneration, 30°F-4,56m3, 35°F-3,14m3, 40°F-3,91m3, 45°F-3,04m3, 50°F-2,74m3, 60°F-2,28m3.
* Max. flow 1m3/h.
* Dimensions Europe II - Base (mm.): 480x320 * Height (mm.): 1.120

Model Specifications 15000126-30 30lt. resin (suitable for 6/8/10 People)
* Exchange capacity: 160ºHFxm3.
* Salt consumption for regeneration: 4,3 Kg./salt.
* Water consumption for regeneration: 201lt.
* Quantity of treated water for regeneration, 30°F-5,33m3, 35°F-4,5m3, 40°F-4m3, 45°F-3,55m3, 50°F-3,2m3, 60°F-2,66m3.
* Max. flow 1,47m3/h.
* Dimensions Luxury II - Base (mm.): 605x350 * Height (mm.): 1.120
Related products
Customers Login
e-mail
password

Ionicore Cartridges Extruded Activated Carbon Block High Filtration Capacity Water Purifiers

Bestsellers
 Residential cabinet water softeners 
1

www.sinergroup.it Everpure Filters