This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

UV System Complete Set Ultrarays Purifier Germicidal Lamp Philips

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Automatic water softener valve Clack WS1TC 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin

Automatic water softener valve Clack WS1TC 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
printask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
15000117-30
Automatic water softener valve Clack WS1TC 1" electronic (Rig. Time) 30 lt. Luxury II
 
15000117-08
Automatic water softener valve Clack WS1TC 1" electronic (Rig. Time) 8 lt. Europe I
 
15000117-10
Automatic water softener valve Clack WS1TC 1" electronic (Reg. Time) 10 lt. Europe I
 
15000117-12
Automatic water softener valve Clack WS1TC 1" electronic (Rig. Time) 12 lt. Luxury I
 
15000117-15
Automatic water softener valve Clack WS1TC 1" electronic (Rig. Time) 15 lt. Europe II
 
15000117-20
Automatic water softener valve Clack WS1TC 1" electronic (Rig. Time) 20 lt. Europe II
 
15000117-25
Automatic water softener valve Clack WS1TC 1" electronic (Rig. Time) 25 lt. Europe II
 
Informations

Code:
15000117

Weight:
10 Kg

Description
Automatic water softener valve Clack WS1TC 1" electronic (Reg. Time) 8-10-12-15-20-25-30 lt. resin
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Automatic water softener Electronic WS1TC Clack valve 1 " (Reg. Time).Low consumption of water and salt per regeneration. Valve body made of Noryl plastic material, NSF listed. Programming is simple and fast, just enter the time, day of week, time of regeneration, typically 02.00 at night, number of days between regenerations and hardness input. Complete with plug adapter 12/230V - 50Hz European plug. Hardness regulator output. Is required output minimum hardness of around 15°F, but the most commonly used setting is not less than 5°F. Loosening action will reduce mixing with raw water output. To mix a specific output hardness value, adjust screw and test water. Repeat the procedure until you reach the desired hardness value. To check input/output hardness from the device, we recommend to buy cod. 13000001 Titrant kit total hardness (1°F) 15cc single reagent.

TO BUY WITH EVERY SOFTENER
1x 15010302 Clack WS1CI / WS1TC Valve bypass
1x 02001014-02 3-pieces standard housing 10" clear IN-OUT 1" with wrench & wall mounting bracket.
2x 04001006-05 Ionicore wound polypropylene cartridge 9-3/4'' - 50 micron (50)
1x Kit 13000001 Titrant total hardness (1 ° F) 15cc single reagent.)
* Water softeners are supplied without salt, we recommend to use pads salt.

The device is supplied programmed with a input hardness of 40°F, hardness of 0°F output and a safety regeneration every 7 days.
A bypass valve system (if ordered) must be installed on all systems. The bypass valves isolate the device from the water system and allow use of untreated water. Routine maintenance or service may also require that the system is put in bypass.

Features:
* Simple and intuitive programming
* Solid state microprocessor with settings from front panel.
* Large LCD display.
* 48 hours of internal power backup.
* Real day time in hours and minutes.
* Residual volume of softened water.
* Display of regeneration phases and cycle remaining time.
* Fast and easy configuration of regeneration capacity, time and day.
* The set program remains in memory and will not be lost in case of power outages.
* Electronic regenerations step-by-step.
* Regeneration manual, delayed or immediate.
* Lack salt alarm.

Benefits and advantages
Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents formation of deposits in pipes and hydraulic lines. Greater sense of wellness during shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in water softner.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on sodium concentration and water hardness, it is possible that water presents an higher sodium concentration than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a domestic reverse osmosis for drinking water.

Specifications
* Min. pressure: 1.4 bar (1.4 kg/cm2)
* Max. pressure: 8.6 bar (8.6 kg/cm2)
* Min. temperature: 4 ° C
* Max. temperature: 43 ° C
* Water Input / Output 1" male thread
* Exhaust: hose connector with 2m. of tube
* Overflow: hose connection 3/8"

Model Specifications 15000117-08 8lt. resin. (for 1/2 people)
* Exchange capacity: 41,6ºHFxm3.
* Salt consumption for regeneration: 1,04 Kg./salt.
* Water consumption for regeneration: 56lt.
* Quantity of treated water for regeneration, 30°F-1,38m3, 35°F-1,18m3, 40°F-1.04m3, 45°F-0,92m3, 50°F-0,83m3, 60°F-0,69m3.
* Max flow. 0,32m3/h
* Dimensions Europe I - Base (mm): 480x320 * Height (mm): 655

Model Specifications 15000117-10 10lt. resin. (for 1/2 people)
* Exchange capacity: 52ºHFxm3.
* Salt consumption for regeneration: 1,3 Kg./salt.
* Water consumption for regeneration: 70lt.
* Quantity of treated water for regeneration, 30°F-1,73m3, 35°F-1,48m3, 40°F-1,3m3, 45°F-1,15m3, 50°F-1,04m3, 60°F-0,83m3.
* Max flow. 0,45m3/h
* Dimensions Europe I - Base (mm): 480x320 * Height (mm): 655

Model Specifications 15000117-12 12lt. resin. (for 2/3 people)
* Exchange capacity: 62,4ºHFxm3.
* Salt consumption for regeneration: 1,56 Kg./salt.
* Water consumption for regeneration: 84lt.
* Quantity of treated water for regeneration, 30°F-2,08m3, 35°F-1,78m3, 40°F-1,56m3, 45°F-1,38m3, 50°F-1,24m3, 60°F-1,04m3.
* Max flow. 0,54m3/h
* Dimensions Luxury I - Base (mm): 605x350 * Height (mm): 670

Model Specifications 15000117-15 15lt. resin. (for 3/4 people)
* Exchange capacity: 75ºHFxm3.
* Salt consumption for regeneration: 1,95 Kg./salt.
* Water consumption for regeneration: 105lt.
* Quantity of treated water for regeneration, 30°F-2,5m3, 35°F-2,14m3, 40°F-1,87m3, 45°F-1,66m3, 50°F-1,50m3, 60°F-1,25m3.
* Max flow. 0,67m3/h
* Dimensions Europe II - Base (mm): 480x320 * Height (mm): 1.120

Model Specifications 15000117-20 20lt. resin. (for 4/6 people)
* Exchange capacity: 100ºHFxm3.
* Salt consumption for regeneration: 2,6 Kg./salt.
* Water consumption for regeneration: 140lt.
* Quantity of treated water for regeneration, 30°F-3,33m3, 35°F-2,85m3, 40°F-2,5m3, 45°F-2,22m3, 50°F-2,00, 60°F-1,66m3.
* Max flow. 0,9m3/h
* Dimensions Europe II - Base (mm): 480x320 * Height (mm): 1.120

Model Specifications 15000117-25 25lt. resin. (for 6/8 people)
* Exchange capacity: 125ºHFxm3.
* Salt consumption for regeneration: 3,25 Kg./salt.
* Water consumption for regeneration: 175lt.
* Quantity of treated water for regeneration, 30°F-4,16m3, 35°F-3,57m3, 40°F-3,12m3, 45°F-2,77m3, 50°F-2,50m3, 60°F-2,08m3.
* Max flow. 1,12m3/h
* Dimensions Europe II - Base (mm): 480x320 * Height (mm): 1.120

Model Specifications 15000117-30 30lt. resin. (for 6/8/10 people)
* Exchange capacity: 150ºHFxm3.
* Salt consumption for regeneration: 3,90 Kg./salt.
* Water consumption for regeneration: 210lt.
* Quantity of treated water for regeneration, 30°F-5,00m3, 35°F-4,28m3, 40°F-3,75m3, 45°F-3,33m3, 50°F-3,00m3, 60°F-2,50m3.
* Max flow. 1,35m3/h
* Dimensions Luxury II - Base (mm): 605x350 * Height (mm): 1.120
Related products
Customers Login
e-mail
password

Air cooled engine reverse osmosis water coolers rotary pump capacitor

www.sinergroup.it Everpure Filters