Water softener valve Autotrol 368/604, 606 - Meter, Time

The Perfect Fit, Ultra-Compact Design
The 368 Valve Series is the all-around solution for new market opportunities. The low-profile design is the perfect fit for a full range of applications.
• OEM component for compact, cabinet-style systems
• Component for custom-build systems
• Replacement component for system repairs

The Total Package
The 368 Valve is a fully-integrated valve/control combination that packs all the brainpower and performance in one ultracompact housing.
• Easy, Three-Step Programming – Time-of-Day, Salt Dosage, Regeneration Interval
• Full Range of Application Settings – Water Saver and multiple Slow-rinse Cycles
• Battery-Free Memory Retention – Super capacitor provides time-of day-backup
• Water Cycling Design – Incorporates the time-tested reliability of Autotrol valve disc technology
• Multiple Regen Functions – Quick cycle, delay (next 2 a.m.), instantaneous manual operation and increased regen frequency
• Large LED Display – Has icon graphics for system functions (salt dosage, regen interval, camshaft position, and more)
• Front-Loading Components – For fast, easy service

Electrical specifications
• Controller Operating Voltage: 12 Volt – AC (Requires use of Pentair Water®-supplied transformer)
• Input Supply Frequency: 50 or 60 Hz (Controller configuration dependent)
• Motor Input Voltage: 12 Volt – AC Controller System
• Power Consumption: 3 Watts average
• Transformer Output Voltage: 12 Volt – AC 400mA
• Transformer Input Options: 115 Volt – AC 50/60 Hz, 230 Volt – AC 50/60 Hz, 100 Volt – AC 50/60 Hz

Features
• Dimensions in cm (HxWxD) 11,96x22,25x20,82
• Valve Body: Glass-filled Noryl®
• Rubber Components: Compounded for cold water
• Operating Pressure: 20 - 125 PSI (1.38 - 8.61 BAR)
• Water Temperature: 35 - 100°F (2 - 38°C)
• Ambient Temperature*: 35 - 122°F (2 - 50°C)
• Refill Flow Rate: 0.14 gpm (0.53 Lpm)/0.33 gpm (1.25 Lpm)

*Recommended for indoor use only.

Performance
Flow Rates (Valve Only)
• Service @ 15 PSI (1.03 BAR) drop: 16.6 gpm (4.3Cv) / 3.77 m3/h (3.68kV)
• Backwash @ 25 PSI (1.72 BAR) drop: 2.75 gpm (0.55Cv) / 0.62 m3/h (0.48kV)

Valve connections
• Tank Thread: 2-1/2" – 8, male
• Inlet/Outlet Thread: 3/4" BSPT, male - 3/4" NPT, male - 1" BSPT, male - 1" NPT, male
• Drain Line: 1/2" – BSPT, male / 1/2" – NPT, male
• Brine Line: 3/8" – BSPT, male / 3/8" – NPT, male
• Distributor Tube Diameter: 1.050" (27 mm)
• Distributor Tube Length: Flush to top of tank ± 1/2"

Options/Accessories
• 6" to 10" Diameter Pressure vessels
• Regenerant Injectors: E, F, G, H, and J
• External Drain Line Flow Controls (DLFC): 1.0, 1.3, 1.7, 2.2 gpm (3.8, 4.9, 6.4, 8.3 Lpm)