Languages
Products
telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it
Water softener valve Autotrol 255/760, 255/740 Eco Logix 1" - Metered, Time
Variants
Code
Description
15010101-050
Water softener valve Autotrol 255/760 Metered/Time - injector and flow regulator 8" W./O. mixing and connectors (1)
15010101-002
Water softener valve Autotrol 255/740 Logix 1" - Time - injector, flow regulator 7", without by-pass (4)
15010101-019
By-pass for Autotrol valve 255 - W./O. connectors
15010101-013
Autotrol 255 - By-pass connectors 3/4" (Required 1st. installation opt. A) (x 2pcs.)
15010101-014
Autotrol 255 - By-pass connectors 1" (Required 1st. installation opt. B) (x 2pcs.)
15010101-017
Hardness adjustment screw (Required 1st. installation)
15010101-016
Yoke brass connection 1"
15010101-043
Yoke brass connection 1" with integrated mixing screw (excludes hardness adjustment screw)
15010101-056
Autotrol 255 - Plastic yoke kit 3/4" BSP connection with o-ring
15010101-048
(5) Autotrol 255 valve - replacement top plate
15010101-022
(7) Autotrol 255 valve - replacement cover slim line
15010101-042
(7) Autotrol 255 valve - replacement cover long line
15010101-053
(8) Autotrol 255 O-Ring kit tank adapter x 6pcs
15010101-038
(9) Autotrol 255 O-Ring kit piping boss (3 pcs)
15010101-041
(12) Autotrol 255 - replacement Camshaft
15010101-021
(13) Autotrol 255 - 368 valve - replacement Logix Motor / Gear / Cable
15010101-023
(15) Autotrol 255 Injector E - yellow (6" vessel)
15010101-024
(15) Autotrol 255 Injector F - peach (7" vessel)
15010101-025
(15) Autotrol 255 Injector G - tan (8" vessel)
15010101-031
(15) Autotrol 255 Injector H - light purple (9" vessel)
15010101-026
(15) Autotrol 255 Injector J - light blue (10" vessel)
15010101-032
(15) Autotrol 255 Injector K - pink (12" vessel)
15010101-033
(15) Autotrol 255 Injector "L" - orange (vessel 13"/14")
15010101-049
(17) Autotrol 255 flow regulator with o-ring Vessel 6"
15010101-027
(17) Autotrol 255 flow regulator with o-ring (1.2 gpm; 4.5 lpm) Vessel 7"
15010101-028
(17) Autotrol 255 flow regulator with o-ring (1.6 gpm; 6.1 lpm) Vessel 8"
15010101-034
(17) Autotrol 255 flow regulator with o-ring (2.0 gpm; 7.6 lpm) Vessel 9"
15010101-029
(17) Autotrol 255 flow regulator with o-ring (2.5 gpm; 9.5 lpm) Vessel 10"
15010101-035
(17) Autotrol 255 flow regulator with o-ring (3.5 gpm; 13.2 Lpm) Vessel 12"
15010101-036
(17) Autotrol 255 flow regulator with o-ring (4.1 gpm; 15.5 Lpm) Vessel 13"
15010101-037
(17) Autotrol 255 flow regulator with o-ring (4.8 gpm; 18.2 Lpm) Vessel 14"
15010101-020
(19) Autotrol 255 valve - replacement Air Check Kit 1/4" M.
15010101-039
Autotrol 255 replacement ballast EU plug
15010101-040
(20) Autotrol 255 - replacement optical sensor
15010101-045
(18A) Autotrol 255 - replacement regeneration refill controller
15010101-055
(21) Autotrol 255 - replacement flow control ball
15010101-046
Autotrol 255/760 - replacement Logix 760 volumetric controller display
15010101-047
Autotrol 255/740 - replacement Logix 740 C chronometric controller display
15010101-051
Autotrol 255 - Clapet/discs valve kit for Autotrol 255/740-760 valve
15010101-052
Autotrol 255 - Gasket for by-pass 1" M. BSP
15010101-054
(6) Autotrol 255 - Clapet / discs valve kit replacement spring
Informations
Code:
15010101
Weight:
4 Kg
Description
Water softener valve Autotrol 255/760, 255/740 Eco Logix 1" - Metered, Time
click on images to enlarge
Full description
Recommended for automatic systems for residential water softening; valve body in plastic material Noryl, NSF listing; valves sealing rubber for use in cold water, material listing NSF; operating flow rate Kv = 3.4; backwash flow rate equal to 22,7 lpm with delta p 1.72 bar, range = 5 to resin capacity of 75 liters, available with the following series LOGIX timers (see data 01-03-02-IT):
or 740 C - ET Electronic lap;
or 760 C - ET Electronic volume;
or 742 C programmable electronic chronometric;
or 762 C Programmable electronic volumetric
complete with power outlet 12/230V - 50Hz European plug; Bottle connection Threaded: 2 ½ "- 8 AN male. * Connect the brine line Threaded ¼ "NPT male. * Diameter of diffuser tube 1.05 "(= 27mm)
RECOMMENDED OPERATING CONDITIONS
Pressure 1.38 ÷ 8.27 bar. * Water temperature 2°C to 38°C
For codes 15010101-036 and 15010101-037(point 17) the ball of point 21, should be removed, see exploded.
>>Exploded View<< (Downloadable on-line only)
or 740 C - ET Electronic lap;
or 760 C - ET Electronic volume;
or 742 C programmable electronic chronometric;
or 762 C Programmable electronic volumetric
complete with power outlet 12/230V - 50Hz European plug; Bottle connection Threaded: 2 ½ "- 8 AN male. * Connect the brine line Threaded ¼ "NPT male. * Diameter of diffuser tube 1.05 "(= 27mm)
RECOMMENDED OPERATING CONDITIONS
Pressure 1.38 ÷ 8.27 bar. * Water temperature 2°C to 38°C
For codes 15010101-036 and 15010101-037(point 17) the ball of point 21, should be removed, see exploded.
>>Exploded View<< (Downloadable on-line only)
Related products
