UV Complete set 12W. 5lt./min. - 1/8" F. x 1/8" F.

UV Complete set 12W. 5lt./min. - 1/8" F. x 1/8" F.

Designed to destroy any bacteria in the water. The deep biostrutturale disorder that causes the beam on the bacteria, interferes with the ability to reproduce every type of microorganism, making it harmless. Is advised to install a filter upstream of the UV sterilizer, and in this way impurities of every kind and texture are retained. This device is essential if you want to achieve a high level of disinfection in fact, the lack of filtration and removal of particles suspended in water, results in decreased efficiency of the sterilizer.

* Temperature: The water inlet must not exceed 38 ° C.
* Pressure: the pressure input should not exceed 10 bar.

* Connection to the pipes:
[Cod.: 12000006-01] - female thread 1/8 IN (on the bottom), female thread OUT 1/8 (top right).
[Cod.: 12000006-02] - male thread 3/8 IN (top left), female thread 3/8 OUT(bottom right).
[Cod.: 12000006-06] - male thread 1/2 IN (top left), female thread 1/2 OUT(bottom right).

* Dimensions:
[Cod.: 12000006-01] - 300mm x 40Ø
[Cod.: 12000006-02] - 300mm x 50Ø
[Cod.: 12000006-06] - 394mm x 60,3Ø