This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

UVC Water Systems Ultrarays Water Purifiers RO Systems Water Filter Pools

order
other filters

Booster pump 2500W, 36VDC w/o ballast, 3/8" F. NPT (6)
Booster pump 2500W, 36VDC w/o ballast, 3/8" F. NPT (6)
060130
Features: Nominal Voltage: 36VDC; Connections: 3/8" NPT; Inlet Pressure: 0,2MPa; Outlet Pressure: 0,5MPa; Working current: 1,6A; Maximum current: 2,5A; Working Flow: 3,25LPM; Bypass pressure: 0,85~1,0 MPa.
Booster pump 800GPD, 230V - 50/60Hz - 3/8" F. NPT - 5/16" and 3/8" quick-fit (6)
Booster pump 800GPD, 230V - 50/60Hz - 3/8" F. NPT - 5/16" and 3/8" quick-fit (6)
060131
Features: Nominal Voltage: 230VAC; Frequency: 50/60Hz; Inlet Pressure: 0,2MPa; Working Pressure: 0,7MPa; Working current: 0,55A; Maximum current: 0,80A; Working Flow: 3,6 LPM; Bypass pressure: 1,05~1,2 MPa; Water Temparature: 38°C.
Booster pump 150GPD, 230V - 50/60Hz - 3/8" F. NPT (6)
Booster pump 150GPD, 230V - 50/60Hz - 3/8" F. NPT (6)
060132
Features: Nominal Voltage: 230VAC; Frequency: 50/60Hz; Inlet Pressure: 0,2MPa; Working Pressure: 0,5MPa; Working current: 0,17A; Maximum current: 0,28A; Working Flow: 1,5 LPM; Bypass pressure: 0,85~1,00 MPa; Water Temparature: 38°C.
Ballast 24V 2,5A for code 060129 (6)
Ballast 24V 2,5A for code 060129 (6)
060134
Features: - INPUT: 100-240V - 50/60Hz - 3A. - OUTPUT: 24V - 2,5A
Ballast 24V 1,7A for code 060127, 060128 (6)
Ballast 24V 1,7A for code 060127, 060128 (6)
060133
Features: - INPUT: 100-240V - 50/60Hz - 1,5A. - OUTPUT: 24V - 1,7A
Ballast 36V 3A for code 060130 (6)
Ballast 36V 3A for code 060130 (6)
060135
Features: - INPUT: 100-240V - 50/60Hz - 3A. - OUTPUT: 36V - 3A
High Pressure Switch (29-72,52 psi/2-5 bar) 1/4" - 10A.
High Pressure Switch (29-72,52 psi/2-5 bar) 1/4" - 10A.
060076
Factory Calibration: 36,26 psi (2,5 bar)
High Pressure Switch (29-72,52 psi/2-5 bar) 1/4" - 16(4)A.
High Pressure Switch (29-72,52 psi/2-5 bar) 1/4" - 16(4)A.
060122
Factory Calibration: 36,26 psi (2,5 bar)
High Pressure Switch (15-30 psi) (20-40 psi) 1/4" female
High Pressure Switch (15-30 psi) (20-40 psi) 1/4" female
060027
15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure pressure switch for equipment with pump. 20 - 40 psi (1 psi = 0.07 bar) adjustable high-pressure pressure switch for equipment with pump.
High Pressure Switch (20-40 psi) , Male Type 1/4" Jaco
High Pressure Switch (20-40 psi) , Male Type 1/4" Jaco
060028
15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure switch for equipment with out pump.
Single TDS Sensor Probes
Single TDS Sensor Probes
060023
Features - Stainless steel sensor. - Probe: 1/4". - Cable: 45" (114,30 cm.). - Connector: Single 4-pin. - Thermometer pin: Yes. - Sensors have a green wrap and no label. - Pressure Rating: 16bar @ +23°C.
In-line flow sensor
In-line flow sensor
060024
The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It can detect water flow from 1.7 to 14.1 L /min. The connection of the FS-2000(H) is 3/ 8” NPT female. Its body and turbine are made of acetal copolymer (POM) material. The best location to connect the FS-2000(H) is on the outlet channel of the filter. Because it's sensitive to rust an
Pressurised accumulator tanks in steel painted white 1,8 Gal.- 6,8 lt. (1)
Pressurised accumulator tanks in steel painted white 1,8 Gal.- 6,8 lt. (1)
060045
Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Diameter: 210mm. Height: 340mm.
Pressurised accumulator tanks in steel painted white 2,1 Gal.- 8 lt. (1)
Pressurised accumulator tanks in steel painted white 2,1 Gal.- 8 lt. (1)
060061
Inner membrane: butyl * Inner covering: Polypropylene liner * Max. work pressure 7 kg/cm2. * Preloading pressure 0.5 kg/cm2. * Diameter: 202mm. * Height: 260mm. * Connection 1/4"
Pressurised accumulator tanks in steel painted white 2,2 Gal.- 8,3 lt. (1)
Pressurised accumulator tanks in steel painted white 2,2 Gal.- 8,3 lt. (1)
060047
Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Diameter: 230mm. Height: 360mm.
Pressurised accumulator tanks in steel and stainless steel 3,2 Gal.- 12,1 lt. (1)
Pressurised accumulator tanks in steel and stainless steel 3,2 Gal.- 12,1 lt. (1)
060046
Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Material: Steel Diameter: 275mm. Height: 340mm.
Pressurised accumulator tanks in steel plastic covering 5,5 Gal.- 21 lt. (1)
Pressurised accumulator tanks in steel plastic covering 5,5 Gal.- 21 lt. (1)
060048
Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2. Preloading pressure 0.5 kg/cm2. Diameter: 280mm. Height: 410mm.
Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1)
Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1)
060050
Features: - Capacity: 10,7 Gal. - 40,6 lt - Diameter: 390mm. - Height: 500mm. - Connection: 1"F. or open/close ball valve with compression fitting
109 products found - 4 pages
|<<<23
4
>> >|
Customers Login
e-mail
password

www.sinergroup.it Everpure Filters