This site uses cookies to improve user experience ok, don't show again read privacy policy x
Languages
Products

Runxin water F68 softeners residential valves regeneration meter time by-pass Up-flow hardness regulation

telephone
(+39)0773.52.30.14
fax
(+39)06.233.234.260
e-mail
info@sinergroup.it

Omnipure K5586 antiscale GAC in line filter 3/8" FPT 2,5"x10" (25)

Omnipure K5586 antiscale GAC in line filter 3/8" FPT 2,5"x10" (25)
printcompareask a
question
Ask a question
x
First name

e-mail (*)

Subject

Text (*)

(*) required fields
sendclose
Variants
Code
Description
 
07001021-03
Omnipure K5586 CC antiscale GAC in line filter 3/8" FPT 2,5"x10" (25)
 
Informations

Code:
07001021

Weight:
0.655 Kg

Brand:
Omnipure Filter
Mfr. Code:

Description
Omnipure K5586 antiscale GAC in line filter 3/8" FPT 2,5"x10" (25)
click to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlargeclick to enlarge
click on images to enlarge
Full description
Reduction of odor, color, taste, ideal for vending distributors and ice makers.
Designed in order to be located inside of machinery for applications in catering, in coffee makers, vending machines and reverse osmosis.

* Improve taste of beverages.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Installation: horizontal or vertical.
* The rapid filter is easy to install and replace without use of special tools.

The anti-limescale inhibitor to base of polyphosphate, does not allow at limescale of from depositing inside water and pumps circuit. Reduces maintenance costs and machine downtime maintaining them functioning at full capacity.

The IN LINE cartridges do not require a filter head or bayonet joints for their installation and may be placed in any position (horizontal or vertical).
The rapid filter is easy to install and replace without use of special tools.

Features:
* Chlorine reduction
* Limescale reduction

• Technology: Granular activated carbon (GAC)
• Micron rating: None
• Service life: See table
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)
• Filter dimensions HxD (mm.): 63,49x254(mm.) - 2,5”x10"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of cartridge.
• Change cartridges: When capacity is reached, or when flow comes too slow (precipitates under 0,7bar/10psi), every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used with disinfected water that may contain filterable cysts. All systems must be maintained according to producer instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Related products
Features
Features

www.sinergroup.it Everpure Filters