SR-02 ADVanced has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. It gives you protection against overpressure and pressure fluctuations in output. It makes you check the filling of the cylinder. Lets you precisely adjust the pressure of use. The two pressure gauges indicate the charge of the cylinder and the outlet pressure of CO2. Features: - Material: Aluminum HR - Treatment: Anodized - Input Pressure: From 1

Pressure reducer low-profile with connection ACME. This regulator requires an height only 2 cm (0.78 inch) allowing the use of ACME cylinders in very small spaces. Mounting and dismounting from the cylinder will not require tools. Features: - Material: Aluminum HR - Treatment: Anodized - Input Pressure: From 1 to 160 bar - Output Pressure: 0-5,5 bar [Adjustable] - Gauges: output pressure - Safety: Overpressure (Pop-Off) - IN female thread: ACME - OUT female thread: 1/8" - Flow Rate:

With this adapter, it is possibile to use the pressure reducer from rechargeable cylinders to disposable cylinders.

SR-02 has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. * Material Aluminum HR * Treatment Anodized * Input Pressure From 1 to 160 bar * Output Pressure Adjustable * Gauges output pressure * Safety Overpressure (Pop-Off) * In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension. * Out female thread: 1/8" * Flow Rate 15 l/min.

Has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. Features: - Material Aluminum HR - Treatment Anodized - Input Pressure from 1 to 160 bar - Output Pressure: 0-5,5 bar [Adjustable] - Gauges output pressure - Safety Overpressure (Pop-Off) - In Female thread: 11x1 (disposable cylinder) - Out female thread: 1/8" - Flow Rate: 15

Has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. Features: - Material Aluminum HR - Treatment Anodized - Input Pressure from 1 to 160 bar - Output Pressure: 0-5,5 bar [Adjustable] - Gauges output pressure - Safety Overpressure (Pop-Off) - In Female thread: 21.8 (rechargeable cylinder) - Out female thread: 1/8" - Flow Rate 15 l

Has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. It gives you protection against overpressure and pressure fluctuations in output. It makes you check the filling of the cylinder. Lets you precisely adjust the pressure of use. The two pressure gauges indicate the charge of the cylinder and the outlet pressure of CO2. Features: - Material Aluminum HR - Treatment Anodized - Input Pressure From 1 to 160 bar - Ou

Has everything you need for your safety and always to have under control the operating parameters of your installation of CO2 and N2. Features: - Material Aluminum HR - Treatment Anodized - Input Pressure from 1 to 160 bar - Output Pressure: 0-5,5 bar [Adjustable] - Gauges output pressure - Safety Overpressure (Pop-Off) - In Female thread: 21.8 (rechargeable cylinder) - Out female thread: 1/8" - Flow Rate: 15

The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy, stainless steel and, on request, holes forwall bracket (M5). Material: Aluminum HR Input Pressure From 10 to 120 bar Output Pressure: Adjustable (0 - 5,5bar) Safety: Overpressure (Pop-Off) Connecti

The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy, stainless steel and, on request, holes forwall bracket (M5). Material: Aluminum HR Input Pressure From 10 to 120 bar Output Pressure: Adjustable (0 - 5,5bar) Safety: Overpressure (Pop-Off) Connecti

For cod. 01012004-01/-02, 01012008, 01012006-02, 01012010-01.

The pressure gauges can be mounted in all the pressure reducers with predisposition, following the correct mounting. To assemble the high-pressure pressure gauge in the HP marked port. The opposit port is dedicated at LP low-pressure pressure gauge mounting. Don't assemble the LP low-pressure pressure gauge in the HP high-pressure pressure gauge dedicated port.

The pressure gauges can be mounted in all the pressure reducers with predisposition, following the correct mounting. To assemble the high-pressure pressure gauge in the HP marked port. The opposit port is dedicated at LP low-pressure pressure gauge mounting. Don't assemble the LP low-pressure pressure gauge in the HP high-pressure pressure gauge dedicated port.

01012021-01 Total length: 1050mm. Work pressure: 0-200Bar. Connections: Female Thread: W21.8 CH.30 Male Thread: W21.7 CH.24 Material: CW614N Tube OD: 1/4" Length: 975mm. Material: Thermoplastic - KEVLAR 01012021-02 Total length: 1500mm. W

01012022-01 Total length: 1050mm. Work pressure: 0-200Bar. Connections: Female Thread: W21.8 CH.24 Male Thread: W21.7 CH.24 Material: CW614N Tube OD: 1/4" Length: 932mm. Material: Thermoplastic - KEVLAR 01012022-02 Total length: 1500mm. W

Blind rivet, copper bushing, copper-plated steel nail, brass faston.

Flat washers without chamber, with outside diameter. Features: Material: Stainless steel AISI304 Color: Natural Reference standard: DIN9021, UNI6593, ISO7093 Dimensions: A= 12mm. B= 4mm. C= 1mm.